AI Content Chat (Beta) logo

book.book Page 10 Friday, July 19, 2013 12:53 PM Temporary Tire RepairTemporary Tire Repair Inflating with Air Only NOTE: For your convenience, the tire repair kit If you have a Tesla tire repair kit as described in includes a selection of adapters that allow you page7.8, follow these steps to inflate a tire with to inflate other items. These adapters are air: located in a compartment on the back of the compressor. 1. Detach the power supply connector from the rear of the compressor and plug it into the 12V power socket located in Model S on the front of center console. CAUTION: To avoid overheating, do not use the compressor continuously for more than eight minutes. Allow the 2. Release the black air hose from the compressor to cool for 15 minutes compressor. between uses. 3. Attach the air hose to the valve and press CAUTION: The compressor runs slowly the lever down to secure it in place. when overheated from excessive use. Turn it off and allow it to cool. 4. Ensure the compressor is lying on a level surface with the pressure gauge facing to the side where you can read it. 5. To add air, turn on the compressor and inflate until the desired pressure is reached. 6. To release air, turn off the compressor, then press and hold the red button until the desired pressure is reached. 7.10 MODEL S OWNERS MANUAL

book.book - Page 108 book.book Page 107 Page 109