TEMPEST POWER FILTERS The purpose of Tempest power filter is to prevent eavesdropping of confidential information. Also with the increasing need to protect equipment housed within a shielded area from the damaging and disrupting effects of electromagnetic pulses and signals, as well as providing protection against surges produced from solar flares, nuclear weapons and lightning strikes, our uniquely designed range of modular filters ensure equipment is suitably protected at all times. European EMC Products Ltd supply a complete range of 2-Line/SP&N and 4-Line/TP&N TEMPEST power line filters. The standard range is 16A, 32A, 63A, 125A, 200A and 400A supporting facility compliance with the requirements of NATO standard SDIP-29, and equipment compliance with SDIP-27. Our standard Tempest Power Filters are issued with a general electrical safety certificate per unit/batch which includes an Insertion Loss Test Certificate to 4GHz. MIL-STD Tempest Power Filters come with an EU Declaration of Conformity and an Asymmetrical Insertion Loss (at 50 Ohm) Test Certificate can be issued upon request. All filters are produced in RAL 9016 traffic white, full gloss. We manufacture our filters in Configuration āCā In Line Input/rear output, other configurations available upon request. Low Leakage filter options also available. STANDARD TEMPEST POWER FILTER RANGE EEP Part No Current (A) Lines Voltage Hertz (HZ) TEMPEST Performance EEPF-16-2-PL-TP 16A 2 240V 50/60HZ Shielding effectiveness performance designed in accordance with requirements of 60 and 100dB from 100kHz - 1GHz available as standard offerings* EEPF-32-2-PL-TP 32A 2 240V 50/60Hz Shielding effectiveness performance designed in accordance with requirements of 60 and 100dB from 100kHz - 1GHz available as standard offerings* EEPF-32-4-PL-TP 32A 4 415V 50/60Hz Shielding effectiveness performance designed in accordance with requirements of 60 and 100dB from 100kHz - 1GHz available as standard offerings* EEPF-63-4-PL-TP 63A 4 415V 50/60Hz Shielding effectiveness performance designed in accordance with requirements of 60 and 100dB from 100kHz - 1GHz available as standard offerings* EEPF-125-4-PL-TP 125A 4 415V 50/60Hz Shielding effectiveness performance designed in accordance with requirements of 60 and 100dB from 100kHz - 1GHz available as standard offerings* EEPF-200-4-PL-TP 200A 4 415V 50/60Hz Shielding effectiveness performance designed in accordance with requirements of 60 and 100dB from 100kHz - 1GHz available as standard offerings* EEPF-400-4-PL-TP 400A 4 415V 50/60Hz Shielding effectiveness performance designed in accordance with requirements of 60 and 100dB from 100kHz - 1GHz available as standard offerings* * Tailored performance requirements to 40GHz available on request. MIL-STD TEMPEST POWER FILTERS EEP Part No Current (A) Lines Voltage Hertz (HZ) TEMPEST Performance HEMP Performance EEPF-16-2-PL-TP-MS 16A 2 240V 50/60HZ Shielding effectiveness performance PCI requirements designed in designed in accordance with accordance with MIL-STD 188-125-1 requirements of 100dB from 100kHz to & DEF Stan 59-188 1GHz, and 60dB from 10GHz to 40GHz* EEPF-32-2-PL-TP-MS 32A 2 240V 50/60HZ Shielding effectiveness performance PCI requirements designed in designed in accordance with accordance with MIL-STD 188-125-1 requirements of 100dB from 100kHz to & DEF Stan 59-188 1GHz, and 60dB from 10GHz to 40GHz* EEPF-32-4-PL-TP-MS 32A 4 415V 50/60HZ Shielding effectiveness performance PCI requirements designed in designed in accordance with accordance with MIL-STD 188-125-1 requirements of 100dB from 100kHz to & DEF Stan 59-188 1GHz, and 60dB from 10GHz to 40GHz* EEPF-63-4-PL-TP-MS 63A 4 415V 50/60HZ Shielding effectiveness performance PCI requirements designed in designed in accordance with accordance with MIL-STD 188-125-1 requirements of 100dB from 100kHz to & DEF Stan 59-188 1GHz, and 60dB from 10GHz to 40GHz* EEPF-125-4-PL-TP-MS 125A 4 415V 50/60HZ Shielding effectiveness performance PCI requirements designed in designed in accordance with accordance with MIL-STD 188-125-1 requirements of 100dB from 100kHz to & DEF Stan 59-188 1GHz, and 60dB from 10GHz to 40GHz* EEPF-200-4-PL-TP-MS 200A 4 415V 50/60HZ Shielding effectiveness performance PCI requirements designed in designed in accordance with accordance with MIL-STD 188-125-1 requirements of 100dB from 100kHz to & DEF Stan 59-188 1GHz, and 60dB from 10GHz to 40GHz* EEPF-400-4-PL-TP-MS 400A 4 415V 50/60HZ Shielding effectiveness performance PCI requirements designed in designed in accordance with accordance with MIL-STD 188-125-1 requirements of 100dB from 100kHz to & DEF Stan 59-188 1GHz, and 60dB from 10GHz to 40GHz* *Specific performance requirements can be accommodated upon request. +44 (0)1799 523 073 | [email protected] | www.euro-emc.co.uk
![European EMC Products Ltd - Power Filters Brochure - Page 3](/cdn-cgi/image/width=600,quality=80,format=webp/https://cdn.relayto.com/images_originals/63f77bf1956e5.jpeg)