SIGNAL LINE & CONTROL LINE FILTERS SIGNAL LINE FILTER Our range of Signal Line Filters have been designed for Shielded Room requirements for attenuation of 60dB from 300 MHz –1 GHz. The filter will continue attenuating up to 30 GHz. Signal Filters are supplied in a compact sized format with current ratings up to 10 amp DC / 8 amp AC per phase. The filters are typically installed within Shielded Enclosures, IT Installations, Data Rooms, Military and Medical facilities. They are available in up to 12 line versions, however further versions are available on request. No. of Max Current Max AC Volt Max Typical Earth Storage Operating Temp Rise Termination Approximate Lines / Per Line Drop @ Full Load Voltages Voltage mA Temp Range Temp. @ Full Load Type Weight Per Line (Worst Case) AC DC AC STD 400 HZ 1-4 10A 8A 500mV 250V AC 1 4 -25 – +85°C -20 – +50°C <35°C M3 Thread 400g 4-8 10A 8A 500mV 250V AC 1 4 -25 – +85°C -20 – +50°C <35°C M3 Thread 800g 9-12 10A 8A 500mV 250V AC 1 4 -25 – +85°C -20 – +50°C <35°C M3 Thread 1200g CONTROL SIGNAL FILTER We offer a range of Control Line Filters which have been designed for maximum performance for Shielded Room applications. Shielded Rooms require high levels of attenuation to ensure no conducted/radiated emissions are either imported or exported from the room. The filters come in 2, 4, 8, 10 & 12-line formats, or as requested, and have a current rating of 500mA -3 Amps. Our Control Line filters are designed in accordance with MIL-STD 188-125-1. Rated Voltage AC: 250V AC, 50/60Hz Rated Voltage DC: 300V DC Rated Current: See table below Maximum Temperature Rise on Full Load: 25°C Operating Temperature: -20°C – + 50°C Storage Temperature: -25°C – + 85°C Insulation Resistance: >100MΩ Discharge Resistors: Internally fitted from line to case Discharge Time to Below 34V: <10 seconds Termination Types: Din Rail/Spindle Technical Specifications EEP Part No Lines Current (A) Rated Voltage (Max V) Weight EEPF-2-CLF 2 3.0 300 DC / 250 AC 3kg EEPF-4-CLF 4 2.0 300 DC / 250 AC 4kg EEPF-8-CLF 8 2.0 300 DC / 250 AC 8kg EEPF-10-CLF 10 2.0 300 DC / 250 AC 10kg EEPF-12-CLF 12 2.0 300 DC / 250 AC 12kg +44 (0)1799 523 073 | [email protected] | www.euro-emc.co.uk
![European EMC Products Ltd - Power Filters Brochure - Page 5](/cdn-cgi/image/width=600,quality=80,format=webp/https://cdn.relayto.com/images_originals/63f77bf3113d3.jpeg)