Logo Usage 3:6 ® USB4 40Gbps Device Power Port Logo ® These requirements apply to use of the USB4 40Gbps Device Power Port Logo and must be followed. Minimum Clear Space Clear Space Avoid visual clutter by maintaining a minimum amount of 1X 1X clear space around the Logo that is equal to the width of the battery terminal for the size selected. X Minimum Sizes The minimum size of the largest dimension of the Logo is 5mm (0.2 inches). Measurement does not include the “™”. 1X 1X Logo Orientation The Logo can be oriented horizontally with the battery Minimum Size Logo Orientation terminal to the right or vertically with the battery terminal to the top. .2 inches Horizontal Vertical Orientation Orientation Licensee in not obligated to use the “™” and may omit the trademark ™ symbol on the Where the symbol is so omitted, the manufacturer/Licensees must include the ® USB4 40Gbps Device Power Port Logo for mobile and non-mobile Product, for which following statement in their user’s manual/printed materials accompanying the Licensee is printing/engraving on chassis where the reasonable alternatives for the Product: “The USB4® 40Gbps Device Power Port Logo is a trademark of USB ® the location and size of the Logos do not allow for the symbol to have a maximum Implementers Forum, Inc.” and must be accompanied with the proper USB4 40Gbps dimension of 15mm or more. This permission is limited only to these exact situations. Device Power Port image of the mark with the correct rendering of the ™. ® USB4 Logo Usage Guidelines | © 2022 USB Implementers Forum, Inc. (USB-IF). All rights reserved.